Stainless Steel Instrumentation Tubes

  • Our Instrumentation Tubes are available in a complete range of corrosion-resistant Stainless Steels Seamless and Welded Tubes.
  • Meanwhile, all sizes are supplied in the company of smooth surfaces and close dimensional tolerances that reduce the possibility of leakages when connecting tubes by means of couplings.
  • We supply Solution Annealed & Passivated Steel Tubing with assuring Quality of Closer Dimensional Tolerances and higher corrosion resistance Stainless Steel Seamless and Welded Tubes.

Product Range

Outside Diameter6.0 mm to 60.00 mm
Walll Thickness0.7 mm to 6.0 mm
GradeTP 304/L/H, TP 316/L/H/Ti, TP 317/L, TP 321/H, TP 347, TP 310, S31803, S32205
SpecificationASTM, ASME, DIN EN (GERMAN), NF (AFNOR), JIS (JAPAN)
      • Ability to supply tubes with stringent NDT Testing, Special Chemistry, Lower Residual Stress values, higher Corrosion Resistance etc.
      • Hot Extruded Mother Hollows are used to manufacture tubes for producing finished tubes
      • Controlled dimensional tolerance as per customer requirement.
      • Solution Annealed & Passivated
      • Stabilization Heat Treatment
Stainless Steel Seamless Pipe Manufacturing Process - Scoda tubes

The mother hollow is then drawn with the help of Tungsten Carbide Die and Plug to get the desired diameter and thickness. It is then annealed, straightened, cut, deburred, pickled and passivated. The tubes then undergo a 100% hydro-testing, visual and dimensional examination, 100% PMI testing They are then marked and suitably packed before dispatch.

  • Atomic Energy
  • Fertilizer Plants
  • Automobile
  • Chemical Industries
  • Industrial Equipments
  • Hydraulic Tubing

FAQ

  • We, SCODA TUBES LIMITED are a Professional Manufacturer and Delivering Best Quality Solution for Stainless Steel Pipes and Tubes.
  • We mainly produce Stainless Steel Seamless & Welded - Pipes, Tubes, Heat Exchanger Tubes, High Precision and Instrumentation Tubing.
  • Since 2008, We have delivered the Extreme Quality Solution for Pipes and Tubes to our Renowned Customer that makes us one of the Leading Stainless Steel Pipes and Tubes Manufacturer Company in India.
Scoda Tubes Ltd has followed Quality Standards for all of Manufacturing Process Stages right from Raw Material, Cold Rolling till the Final Tubular Product is Ready for Dispatch.
  1. We also provide you Material Test Certificates according to Standards.
  2. We are willing to accept the Third party Inspection Agency like…EIL, IBR, BVIS, LRA, INTERTEK, SGS, TUV NORD, TUV SUD, DNV, CEIL, GULF LLOYDS, VELOCY, IRS, BAXCOUNSEL, ABS, etc..
  • Yes. If you have special requirements on Products for Outside Diameter, Thickness, Length, etc. or Packages for a wooden box, Plastic Packaging etc.
  • We accept it as per Quality Standard and do customization for you.
  • Generally, our MOQ is 1 ton. But if you want to place a trial order as the beginning of our cooperation, we can accept a smaller quantity at first.
  • Surely we will have a further and longer partnership after the beginning.
  • Free samples can be provided as you required. You need only to bear the freight cost.
  • Scoda Tubes Ltd., We are strictly focused on Quality at producing Pipes and Tubes starting from Raw material, Cold rolling till the Final Tubular Product is Ready for Dispatch.
  • Since 2008, We have delivered the Extreme Quality Solution for Pipes and Tubes to our Renowned Customer that makes us one of the Leading Stainless Steel Pipes and Tubes Manufacturer Company in India.
client
client
client
client
client
client
client

START NOW! YOUR BIG OPPORTUNITY MAY BE RIGHT WHERE YOU ARE!

We’d love to hear about your awesome project requirements, Don’t hesitate to get in touch with us. Approach us as your project partner.

Let's talk about Your Requirements

Specification of ASTM/ASME, German (EN), NF, JIS for Stainless Steel Seamless and Welded – Pipes and Tubes

STANDARDSPICIFICATIONAPPLICABLE TO
ASTM / ASMEA / SA 213For Seamless Tubes mainly applicable to Heat Exchangers, Super Heater & Steel Boilers
A / SA 249For Welded Tubes mainly applicable to Heat Exchangers, Boilers, Condenser, Super Heater, etc.
A / SA 268For Seamless & Welded Tubes for General Services
A / SA 269For Seamless & Welded Tubes for General Services
A / SA 312For Seamless & Welded Pipes
A / SA 358For Welded Pipes
A / SA 688For Welded Water Heater & Heat Exchangers U-Tubes
A / SA 789For Seamless & Welded Duplex Stainless Steel Tubes, Pipes & U-Tubes.
GERMAN (EN)DIN 17456For Seamless Tubes For General Services.
DIN 17457For Welded Tubes For Specific OR Special Requirements.
DIN 10216-5For Seamless Tubes For Specific OR Special Requirements.
DIN 10217-5For Welded Tubes For Specific OR Special Requirements.
NFNF A 49-117For Seamless Ferritic & Austenitic Stainless Steel Tubes for General Services.
NF A 49-217For Seamless Ferritic, Austenitic Stainless Steel Tubes For Heat Exchangers.
JISJIS G 3459For Stainless Steel Pipes.
JIS G 3463For Stainless Steel Boiler & Heat Exchanger Tubes.

Highlight of ASTM A-269 Seamless & Welded Austenitic Steel Tubing for General Service

Specifications

Allowable Outside Diameter Variations
in mm

Allowable Wall
Variations in %

Exact length Tolerances in mm

Testing

ASTMA-269
Seamless & Welded
austenitic steel
tubing for general service

Diameter
Over
Under
Over
Under
Over
Under
• Tension Test
• Flare Test (Seamless only)
• Hardness Test
• Flange Test (Welded only)
• Reverse Flattening Test (Welded only)
• 100% Hydrostatic Test or NDT

Under 12.7
12.7-38.1 excl.
38.1-88.9 excl.
88.9-139.7 excl.
139.7 203.2 excl.

0.13
0.13
0.25
0.38
0.76
0.13
0.20
0.25
0.28
0.38
15
10
10
10
10
15
10
10
10
10
3.2
3.2
4.8
4.8
4.8
0
0
0
0
0

Material Grades of UNS, ASTM/ASME (TP), DIN/EN for Austenitic, Ferratic/Martensitic, Duplex

MATERIALUNS GRADEASTM / ASME GRADE (TP)EQUIVALENT GRADE ( DIN / EN )
AUSTENITICS 304003041.4301
S 30403304 L1.4306 / 1.4307
S 30409304 H1.4948
S 30400 / S 30403304 / 304 L1.4301 / 1.4306
S 316003161.4401
S 31603316 L1.4404
S 31609316 H1.4919
S 31600 / S 31609316 / 316 L1.4401 / 1.4404
S 31635316 Ti1.4571
S 321003211.4541
S 32109321 H1.4941
S 32100 / S 32109321 / 321 H1.4541 / 1.4941
FERRATIC/MARTENSITICS 405004051.4002
S 410004101.4006
S 430004301.4016
DUPLEX & Super DuplexS 3180322051.4462
S 3275025071.4410

Chemical Compensation in Detailed

STANDARDSPICIFICATIONAPPLICABLE TO
ASTM / ASMEA / SA 213For Seamless Tubes mainly applicable to Heat Exchangers, Super Heater & Steel Boilers
A / SA 249For Welded Tubes mainly applicable to Heat Exchangers, Boilers, Condenser, Super Heater, etc.
A / SA 268For Seamless & Welded Tubes for General Services
A / SA 269For Seamless & Welded Tubes for General Services
A / SA 312For Seamless & Welded Pipes
A / SA 358For Welded Pipes
A / SA 688For Welded Water Heater & Heat Exchangers U-Tubes
A / SA 789For Seamless & Welded Duplex Stainless Steel Tubes, Pipes & U-Tubes.
GERMAN (EN)DIN 17456For Seamless Tubes For General Services.
DIN 17457For Welded Tubes For Specific OR Special Requirements.
DIN 10216-5For Seamless Tubes For Specific OR Special Requirements.
DIN 10217-5For Welded Tubes For Specific OR Special Requirements.
NFNF A 49-117For Seamless Ferritic & Austenitic Stainless Steel Tubes for General Services.
NF A 49-217For Seamless Ferritic, Austenitic Stainless Steel Tubes For Heat Exchangers.
JISJIS G 3459For Stainless Steel Pipes.
JIS G 3463For Stainless Steel Boiler & Heat Exchanger Tubes.
Wall thickness in mm.0.50.60.70.811.21.622.633.23.6
O.D. in mm.Weight in kg/meter
60.0690.0810.0930.1040.1250.1440.176-----
9.520.1120.1340.1540.1740.2130.2490.317-----
100.1190.1410.1630.1840.2250.2640.336-----
12.70.1530.1820.210.2380.2930.3450.444-----
140.1690.2010.2330.2640.3250.3840.496-----
15.870.1920.2290.2660.3010.3720.440.5710.694----
190.2310.2760.320.3640.450.5340.6960.851.0661.21.264-
250.3060.3660.4250.4840.60.7140.9361.151.4561.651.7441.926
25.40.3110.3720.4320.4920.610.7260.9521.171.4821.681.7761.962
31.8-----0.9181.2081.491.8982.162.2882.538
38-----1.1041.4561.82.3012.6252.7843.096
44.5-----1.2991.7162.1252.7243.1133.3043.681
50.8-----1.4881.9682.443.1333.5853.8084.248
63.5------2.4763.0753.9594.5384.8245.391
76.1------2.983.7054.7785.4835.8326.525
101.6------44.98677,8728.82